MCCC MCCC MCCC MCCC
News at MCCC
MCCC
MCCC
MCCC
MyMercer
MCCC
menu bg FUTURE STUDENTS CURRENT STUDENTS ABOUT MCCC ACADEMICS STUDENT SERVICES AND FINANCIAL AID NONCREDIT COURSES AND CONTINUING EDUCATION BUSINESS AND PROFESSIONAL TRAINING/DEVELOPMENT YOUTH PROGRAMS & COMMUNITY menu bg
MCCC MCCC
arrow Non-Credit Courses and
    Certificate Programs
line
arrow Professional Development
line
arrow Career Training Institute
    @ Trenton Campus

line
 

MCCC
arrow State-Funded Training
line
arrow Class Registration
line
arrow Policies, Student Information
line
arrow Forms
line
arrow News & Events
MCCC MCCC
Center for Continuing Studies Programs
arrow Animal Careers
line
arrow Aquatics
line
arrow Business & Management
line
arrow Clinical Development
    & Regulatory Affairs

line
arrow Computers & Information
    Technology
MCCC arrow Construction and UCC
line
arrow Culinary & Wine
line
arrow Education
line
arrow Emergency Training
line
arrow ESL & Languages
line
arrow Fitness & Recreation
MCCC arrow Floral & Interior Design
line
arrow Health Careers
line
arrow James Kerney Campus
line
arrow NICET/Highway Engineering
line
arrow Nutrition
line
arrow Personal Interest
MCCC
spacer
arrow Construction Project Management           arrow OSHA Training           arrow Uniform Construction Code
spacer
spacer spacer

OSHA

Occupational Safety Health Administration (OSHA)
The OSHA 10-Hour construction training course is intended to provide construction workers with a basic knowledge of safety and health hazards found on many construction sites. The course is based on federal OSHA 1926 construction standards and provides students with an overview of how OSHA operates. State-specific OSHA requirements are addressed, where applicable. There are no prerequisites required to take this 10-Hour construction course.
An OSHA 10 Card will be given upon successful completion of the course.

Who should attend?

      • Construction and building trade personnel

      • Employers

      • Contractors

      • Union personnel

      • Safety consultants

 

 

1.0 CEU. Cost: $350 

NCABT-CS014-01
November 18 and December 2*

2 sessions / Saturdays / 8:00 a.m.- 2:00 p.m.**
*No class November 25

**One hour provided for lunch.

Transportation Engineering Technology Instructor


 

Construction OSHA - Hazard Training

 

The following courses are intructed by HazTek Inc.'s experienced safety training professionals. HazTek Inc. just turned twenty years old and is one

of the largest safety firms in the country. The firm was recently named in the
NJ Biz list of New Jersey's Top 250 Privately-held Companies. The Center for Continuing Studies has teamed up with HazTek Inc. to bring you the following training classes so projects remain compliant with government regulatory agencies and, most importantly, so safety is ensured out in the field.

 

 

40-Hour HAZPWOPER Training
Hazardous material workers involved in cleanup/remediation at industrial sites, RCRA or Superfund sites, post emergency response activities of contaminated sites or spills, and voluntary cleanups require the OSHA 40-Hour HAZWOPER training. HAZWOPER 40-Hour Training provides in-depth instruction for working safely at contaminated sites per OSHA requirements and beyond. This course covers 40 hours of instruction required by 29 CFR 1910.120, OSHA’s Hazardous Waste and Emergency training standard.
Designed for workers directly engaged in hazardous substance removal or other

activities which expose or potentially expose workers to hazardous substances and health hazard.

4.0 CEU. Cost: $795

NCABT-CS018-01
September 9 - November 11

10 sessions / Saturdays / 8:00 am.- 2:00 p.m.*

*One hour provided for lunch.

HazTek Inc. Instructor

 

30-Hour OSHA General Industry Outreach
The OSHA 30 Hour General Industry Outreach Training course is a comprehensive safety program designed for anyone involved in general industry. Specifically developed for safety directors, foremen, and field supervisors, the program provides complete information on OSHA compliances issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1910. General Industry workers must receive additional training, when required by OSHA standards, on specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA 30-Hour General Industry Outreach DOL course completion card within 6-8 weeks. Designed for entry to senior-level factory employees, site supervisors, foremen, and safety managers.

3.0 CEU. Cost: $650

NCABT-CS017-01
September 12 - October 12

10 sessions / Tuesdays and Thursdays / 6:00.- 9:00 p.m.

HazTek Inc. Instructor

 

10-Hour-OSHA General Industry Outreach
The OSHA 10-hour General Industry Outreach Training Program is intended to provide the entry-level general industry worker with a broad awareness to recognize and prevent hazards on a general industry site. Students will be introduced to OSHA policies, procedures, and standards as well as general industry safety and health principles and work practices covered in OSHA Act Part 1910. Special emphasis will be placed on areas most hazardous using OSHA standards as a guide. General industry workers must receive additional training, when required by OSHA standards, on specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA 10-Hour General Outreach DOL course completion card within 6-8 weeks.
Designed for:
healthcare professionals, factory and warehouse staff, the manufacturing industry, and storage employees.

1.0 CEU. Cost: $375

NCABT-CS016-01
September 23 and September 30

2 sessions / Saturdays / 8:00 am.- 2:00 p.m.*

*One hour provided for lunch.

HazTek Inc. Instructor

 

30-Hour-OSHA Construction Outreach
The OSHA 30-Hour Construction Industry Outreach Training Program is a comprehensive safety course developed for anyone involved in the construction industry. Specifically devised for safety directors, foremen, and field supervisors, the program provides complete information on OSHA compliance issues. This training will provide you with the knowledge and tools to recognize, evaluate, and control hazards found on construction sites. Please note: OSHA course completion cards will be issued to all participants who have fulfilled the requirements of the course. Designed for all personnel with safety responsibilities.

3.0 CEU. Cost: $650

NCABT-CS015-01
October 17 - November 16

10 sessions / Tuesdays and Thursdays / 6:00 - 9:00 p.m.

HazTek Inc. Instructor

 

8-Hour HAZWOPER Annual Refresher
This course is for workers who come into contact with hazardous waste and substances. It meets the requirements outlined in OSHA 29 CFR 1910.120 for eight hours of annual refresher training.
Designed for workers directly engaged in hazardous substance removal or other activities which expose or potentially expose workers to hazardous substances and health hazards who have previously completed the 40-hour HAZWOPER Training.

0.8 CEU. Cost: $175

NCABT-CS019-01
October 14

1 session / Saturday / 8:00 am.- 5:00 p.m.*

*One hour provided for lunch.

HazTek Inc. Instructor

 


CONTACT US :

Registration Desk: 609-570-3311
Register online here.

Unless otherwise noted, Continuing Studies students must be 18 years of age or older.

REFUND POLICY: 
10 or more days before the beginning of a class: 100% refund

Less than 10 days before class start date: no refund

Credit card payments will be refunded to the credit card; cash and check payments will be refunded via a check from MCCC.

 

Top of page



spacer
spacer
bottom
spacer
spacer